<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>NDT技术论坛 - 技术论文</title>
    <link>https://wusunjiance.org/forum-249-1.html</link>
    <description>Latest 20 threads of 技术论文</description>
    <copyright>Copyright(C) NDT技术论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 02 Nov 2026 20:11:17 +0000</lastBuildDate>
    <ttl>90</ttl>
    <image>
      <url>https://wusunjiance.org/static/image/common/logo_88_31.gif</url>
      <title>NDT技术论坛</title>
      <link>https://wusunjiance.org/</link>
    </image>
    <item>
      <title>超声波探头磨损对超声波探伤的影响与修复方法</title>
      <link>https://wusunjiance.org/thread-8040-1-1.html</link>
      <description><![CDATA[超声波探头磨损对超声波探伤的影响与修复方法]]></description>
      <category>技术论文</category>
      <author>傅兴森</author>
      <pubDate>Thu, 11 Jan 2018 13:37:08 +0000</pubDate>
    </item>
    <item>
      <title>超声波（UT）探伤中影响缺陷检出的因素</title>
      <link>https://wusunjiance.org/thread-7848-1-1.html</link>
      <description><![CDATA[超声波（UT）探伤中影响缺陷检出的因素]]></description>
      <category>技术论文</category>
      <author>傅兴森</author>
      <pubDate>Thu, 04 Jan 2018 15:12:26 +0000</pubDate>
    </item>
    <item>
      <title>超声波水浸探伤中探头距工件的最佳距离及调整</title>
      <link>https://wusunjiance.org/thread-7847-1-1.html</link>
      <description><![CDATA[超声波水浸探伤中探头距工件的最佳距离及调整]]></description>
      <category>技术论文</category>
      <author>傅兴森</author>
      <pubDate>Thu, 04 Jan 2018 15:11:17 +0000</pubDate>
    </item>
    <item>
      <title>焊缝超声波探伤缺陷性质的判断</title>
      <link>https://wusunjiance.org/thread-5912-1-1.html</link>
      <description><![CDATA[本方法适用于A 型脉冲反射法对焊缝进行超
声检测缺陷定性。对余高磨平的焊缝, 焊缝区域内的
各种缺陷均可用本方法进行定性, 对有余高的焊缝,
只能对不包括余高的焊缝区域内的各种缺陷定性。
对缺陷定性用探头应与规定的检测探头相同。




 ...]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 04:07:13 +0000</pubDate>
    </item>
    <item>
      <title>单面焊焊缝根部端角反射波的识别方法</title>
      <link>https://wusunjiance.org/thread-5911-1-1.html</link>
      <description><![CDATA[对单面焊焊缝( 如常见压力管道对接焊缝) 进行
超声波检测时, 其根部可能产生的回波信号很复杂,
既可能有未焊透、未熔合、裂纹、气孔和夹渣等焊接
缺陷产生的回波, 也可能有焊缝内成型( 内凸或内
凹) 和错边等产生的所谓几何回波。这些信号在探
伤仪示波屏上出现的位置相 ...]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 04:06:19 +0000</pubDate>
    </item>
    <item>
      <title>铸钢轧辊超声波探伤非相关显示的分析及排除</title>
      <link>https://wusunjiance.org/thread-5909-1-1.html</link>
      <description><![CDATA[铸钢轧辊超声波探伤非相关显示的分析及排除
介绍铸钢轧辊超声波探伤中非相关显示的出现机理、出现位置的理论计算和试验分析及其排除方法。]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 04:00:03 +0000</pubDate>
    </item>
    <item>
      <title>大型铸钢轧辊轴心晶间裂纹形成的原因及防止措施</title>
      <link>https://wusunjiance.org/thread-5908-1-1.html</link>
      <description><![CDATA[大型铸钢轧辊轴心晶间裂纹形成的原因及防止措施
大型铸钢轧辊轴心晶间裂纹形成的原因及防止措施
大型铸钢轧辊轴心晶间裂纹形成的原因及防止措施]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 03:59:01 +0000</pubDate>
    </item>
    <item>
      <title>船用钢板漏磁检测的三维有限元分析</title>
      <link>https://wusunjiance.org/thread-5907-1-1.html</link>
      <description><![CDATA[为保证船舶的安全，满足对船用钢板进行定期检测的需要，提出利用漏磁方法检测钢板缺陷，
并进行三维有限元分析和实验验证． 在ANSYS 软件中建立检测传感系统、磁化装置和钢板缺陷的三维模
型，进行钢板缺陷附近的磁场分布状态的数值仿真，得出了船用钢板磁化后的磁场分 ...]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 03:57:21 +0000</pubDate>
    </item>
    <item>
      <title>板结构中裂纹的超声波数值模拟</title>
      <link>https://wusunjiance.org/thread-5906-1-1.html</link>
      <description><![CDATA[　通过引进频散修正系数,选择多音频加窗函数调制的信号,用有限元法模拟了超声波在一个有裂纹的薄板中
的传播,在此基础上,模拟了超声波在有双裂纹的薄板中的传播。结果表明,所建立的算法不仅可以准确地识别单裂纹
在板中裂纹的位置,而且对双裂纹在板中位置的识别也有效。 ...]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 03:56:44 +0000</pubDate>
    </item>
    <item>
      <title>航空工业用薄板兰姆波探伤技术研究</title>
      <link>https://wusunjiance.org/thread-5905-1-1.html</link>
      <description><![CDATA[金属薄板在航空工业中的应用越来越广泛，因此，薄板的质量检验问题相当
关键，可以采用无损检测领域的超声波检测技术对其进行检验。最早应用于金属
薄板探伤的是一种特殊的超声波—兰姆波，由于兰姆波在板材中传播方式的特殊
性，对于金属薄板检验具有纵波和横波难以相 ...]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 03:54:52 +0000</pubDate>
    </item>
    <item>
      <title>薄板腐蚀缺陷兰姆波成像检测的有限元模拟</title>
      <link>https://wusunjiance.org/thread-5904-1-1.html</link>
      <description><![CDATA[基于A0模式兰姆波对薄板腐蚀缺陷进行成像检测, 在频率一定时, 由于腐蚀造成板厚的改变将进
一步影响检测兰姆波速度的变化, 通过检测兰姆波波速的变化可以对板材腐蚀类缺陷进行监测. 根据A0模
式兰姆波的频率特征, 测量发射探头与接收探头之间的兰姆波走时, 结合波的实际 ...]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 03:53:50 +0000</pubDate>
    </item>
    <item>
      <title>压电材料兰姆波方法在薄板损伤检测中的数值仿真</title>
      <link>https://wusunjiance.org/thread-5903-1-1.html</link>
      <description><![CDATA[利用压电材料（ＰＺＴ）对薄板结构中的裂纹进行损伤检测与定位，通过数值仿真说明了该方法的有效性．基于
大型有限元软件ＡＮＳＹＳ平台，利用其中的耦合场单元，建立了薄板与压电材料的耦合动力学模型．利用ＰＺＴ的传
感／作动功能在薄板中激发和接收Ｌａｍｂ波，对板 ...]]></description>
      <category>技术论文</category>
      <author>258232031</author>
      <pubDate>Fri, 22 Aug 2014 03:53:01 +0000</pubDate>
    </item>
    <item>
      <title>小径管焊缝超声爬波探伤工艺方法研究</title>
      <link>https://wusunjiance.org/thread-5741-1-1.html</link>
      <description><![CDATA[小直径薄壁对接焊缝的超声波检测就有其特殊性。要依据所探管子的直径、壁厚、焊缝的焊接方法和检测标准，正确地选择仪器、探头、试块，并能在实际探伤探伤中对缺陷作出正确地判断。





 ...]]></description>
      <category>技术论文</category>
      <author>傅兴森</author>
      <pubDate>Thu, 24 Jul 2014 04:44:22 +0000</pubDate>
    </item>
    <item>
      <title>三维立体相位扫描测量技术在发动机孔探中的应用</title>
      <link>https://wusunjiance.org/thread-5275-1-1.html</link>
      <description><![CDATA[1 工业视频内窥镜测量技术的发展历程 
工业内窥镜的诞生是为了实现间接目视检查，而它应用于民航发动机孔探工作时，操作者除了需要通过它查找缺陷，还需要对缺陷尺寸进行测量，以便满足视情维护的要求。为了得到有判定价值的数据，最初采用接触式测量法，即在光学硬杆镜 ...]]></description>
      <category>技术论文</category>
      <author>everest</author>
      <pubDate>Thu, 24 Apr 2014 05:10:45 +0000</pubDate>
    </item>
    <item>
      <title>超声波TOFD 检测技术</title>
      <link>https://wusunjiance.org/thread-3083-1-1.html</link>
      <description><![CDATA[超声波TOFD 检测技术
         对TOFD 技术的原理、影像形成及缺陷的测量进行阐述;TOFD 技术的应用可提高缺陷检出率,为设备可用性评估提供数据资料,促进我国无损检测技术的进一步发展。
     　TOFD 技术全称Time of Flight Diffraction (绕射波传播时间技术), ...]]></description>
      <category>技术论文</category>
      <author>付兴森</author>
      <pubDate>Mon, 10 Dec 2012 09:13:33 +0000</pubDate>
    </item>
  </channel>
</rss>